|
Available options
- Instantaneous high current transfer
- Virtually free of phase delay at 60 hz
- Elimination of AC line noise
- Elimination of EMI and RFI
- 1.8 meter
|
Coincident Speaker Technology presents a breakthrough in power cord technology
and application, the CST PC. The PC is unique in that it transfers current
instantaneously and with uniform density substantially free from phase delays at
60 hz between a high current source, (amplifier,preamplifier,CD player etc), and
a standard three hole 120 volt AC outlet. The sonic result of using the CST PC
is purer sound, lower noise floor, greater revelation of low level detail and a
huge, yet focused soundstage.
Each cable has 10 separately insulated bundles of 18 AWG 6N Copper (totalling
7AWG) for hot and negative helically and symmetrically wrapped around a
polypropylene dialectric core. The guage of each bundle and cross sectional area
are predetermined to avoid internal inductance and phase delay effects while
providing high current instantaneously and uniformly.
Each conductor bundle is seperately shielded by the use of an aluminum mylar
foil. A non insulated drain wire connected only at the source and a double
twisted pair of ground wires further reduce the effects of line noise, EMI and
RFI. Finally a 6N copper braid acts as a shield over the entire cable to
eliminate the last vestiges of noise.
To minimize micro movement within the cable and to dramatically reduce conductor
and dialectric resonances, a teflon outer braid covers the polypropylene jacket.
Furthermore, a high density shrink wrap is heat applied over hospital grade
Hubbell connectors. This acts as a constrained layer of damping. (This exerts
the equivalent of 500lbs of pressure per square inch).
The end result is a power cord that sounds decidedly superior to the competition
because it was scientifically and correctly designed for that purpose. Purer
sound with no current limiting.
Only an audition can reveal it's superiority. |
