- Frequency Response: 10hz – 25khz +/- .1 db
- Gain: 66 db- MC
- Output Impedance: 250 ohms
- Maximum Voltage Output: 30 V Impedance: 3-10, 11-30, 31-100,
101-300 – MC Phase: In phase
- Dimensions: 73mm x 260mm x 390mm
- Power Supply – 18.5 kilos (40.4 lbs)
- Phono Stage – 9.5 kilos (20.9 lbs)
- Tubes: 4x 12AX7 Reissued Mullards are included.
- Finest Discrete Resistor Dual Mono Volume Pots - Allows
for Direct Connection to Amplifier without the Use of a Line Stage and corrects
for channel imbalances
- Dual Pairs of RCA Outputs allows for Biamping
- Impedance Selector: Optimizes all moving coil cartridges
- Mute Switch: Conveniently mutes signal when changing
records
- Lift AC Ground: Conveniently breaks AC ground to eliminate hum
caused by ground loops.
- Optional Line Stage Input: Input for SACD/CD player. No need for
line stage
|
The Coincident Statement Phono Preamplifier is a high gain, all tube unit
employing the highest quality MC step up transformers to accommodate virtually
all moving coil cartridges. Due to employing only 2 all tube gain stages, high
gain is achieved with low noise. The RIAA curve is passive, zero feedback
utilizing the closest tolerance resistors and polystyrene capacitors to obtain
accuracy of less than .1 db deviation from 20hz – 20khz.
The 66 db overall gain coupled with low output impedance and the use of the
finest discrete resistor volume pots allows the Statement Phono Preamplifier to
be directly connected to an amplifier without the use of a line stage.
There are no circuit boards to deteriorate the signal transfer. Everything in
the Statement Phono Preamplifier is hard wired. The separate power supply has
enough capacity and energy storage to power a 100 watt amplifier. There are
separate transformers for the high voltage and low filaments. Furthermore, the
high and low voltage sections have independent choke and large capacity
filtering.
The build quality of the Statement Phono is the finest available. It was
designed with no cost restraints. It represents an all out assault on the state
of the art.
The design goal of the Coincident Statement Phono Preamplifier was to provide
the purest, most transparent method of playing vinyl. There is no Phono Stage in
existence that surpasses its combination of performance and construction. At its
selling price, The Statement Phono has no peer. |
