- Type: High/Low output moving coil cartridge with flux damper and
softened magnetism
- Output Voltage: 2.8mV High Version (at 1KHz, 5cm/sec.)
- Output Voltage: 0.3mV Low Version (at 1KHz, 5cm/sec.)
- Channel Separation: 25 dB (at 1KHz)
- Channel balance: 1.0 dB (at 1KHz)
- Frequency response: 20 - 20,000Hz (± 2dB)
- Compliance: 12 x 10-6 cm/dyn
- Tracking force: 1.8 - 2.2 grams
- DC resistance: 150 ohms / 5 ohms
- Recommended load resistance: > 1Kohms / > 30 ohms
- Cantilever: 6mm length, hard aluminium
- Stylus: Micro-Ridge
- Weight: 9.1 grams
|
For more than 30 years Dynavector have established an enviable reputation for
producing affordable high quality moving coil cartridges.
Notedly high output models that are designed to work with MM inputs negating the
necessity for equipment change or the use of setup devices required for low
output cartridges. The stunning performance of the Dynavector high output moving
coil cartridges can be attributed to the exclusively Dynavector designed coil
winding machine capable of utilizing extremely fine coil wire providing a high
output to mass ratio
DDV-20X has a solid aluminium alloy body similar to the XX-2. The cantilever is a
6mm length of hard aluminium pipe with a Micro-Ridge stylus. The magnetic flux
damping and softened magnetism along with powerful neodymium magnets gives the
20XH a healthy 2.8 mV output - suitable for most MM inputs. The 20XL
has an output of 0.3 mV ideal for most MC phono stages.
Both high and low versions of their 20X are available ensure for the optimum end
result. The high output model is most suited to valve preamplifiers or
electronics that only offer MM inputs whilst the low output version offers
superb performance when combined with dedicated moving coil inputs.td>
|
